8 Best Pull-Out Trash Can and Recycling Bin Kits for Your Kitchen Remodel

Planning a kitchen remodel often brings a focus to high-end countertops and custom cabinetry, but the true test of a functional kitchen lies in how it handles daily waste. Tucking trash and recycling bins out of sight streamlines your workflow, eliminates odors, and keeps high-traffic walkways clear. Choosing the right pull-out cabinet kit ensures your waste management system is as durable and effortless to use as the rest of your modern kitchen.

Friendly Disclaimer : This content is for educational & general research purposes only. Please consult healthcare providers or other qualified professionals for personalized medical, caregiving, or health-related advice.

Friendly Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you for your support!

Key Measurements to Take Before Buying Your Cabinet Kit

The most common mistake when retrofitting a cabinet for a pull-out trash bin is assuming standard cabinet sizes match the internal clearance. Cabinet manufacturers use nominal exterior dimensions, but the actual interior space is significantly smaller due to the face frame, sidewalls, and hinges. Before purchasing any kit, measure the cabinet opening width—the narrowest point of the opening, which is often restricted by the cabinet door hinges.

Next, measure the internal cabinet depth and height. Remember to account for obstacles like under-sink plumbing, garbage disposals, electrical outlets, and structural back panels. A standard base cabinet typically has an internal depth of 23.5 inches, but older or custom cabinets can vary widely. If your cabinet features a drawer above the opening, your vertical clearance will be severely limited, meaning you must choose shorter bins to ensure the unit slides out without striking the drawer frame.

Finally, check the door style of your cabinetry. If you plan to mount the cabinet door directly to the pull-out frame, you need a kit with adjustable door-mounting brackets. Full-overlay doors require different adjustment tolerances than inset doors, which sit flush inside the frame. Taking these exact measurements ensures your new kit operates smoothly from day one without scraped wood or jammed slides.

• Key measurements to record:
  • Cabinet Opening Width: The clear space between the face frames or hinges.
  • Interior Depth: The usable space from the front face frame to the back wall.
  • Interior Height: The clearance from the cabinet floor to the top frame or drawer bottom.

Double Trash Can Pull-Out – Rev-A-Shelf 5349-1527DM-2

For households that want to sort trash and recycling in one sleek, heavy-duty location, the Rev-A-Shelf 5349-1527DM-2 is an industry standard. This premium double-bin unit organizes waste streams effortlessly, keeping unsightly plastics and paper separate from daily garbage. Designed to slide out from a single cabinet, it uses a heavy-duty brushed aluminum frame that resists rusting and handles the daily wear of a busy kitchen.

What sets this unit apart is its exceptional build quality and ultra-smooth glide system. It features full-extension ball-bearing slides with a soft-close mechanism, meaning the bins slide back into the cabinet quietly and securely with a gentle push. The sturdy aluminum chassis keeps the two 27-quart bins locked in place, preventing tipping or swaying when the drawer is fully extended under a heavy load.

Before buying, confirm that your cabinet opening is at least 11.5 inches wide to accommodate the frame. The installation process is straightforward because the kit includes a door-mounting bracket that attaches directly to your existing cabinet door. This product is ideal for homeowners who prioritize smooth, quiet operation and want a robust, built-to-last system, though it may be overkill for tiny kitchens with minimal cabinet space.

• Key Specs:
  • Capacity: Two 27-quart plastic bins
  • Slide Type: Full-extension progressive soft-close
  • Minimum Cabinet Opening: 11.5 inches wide, 22 inches deep, 19.25 inches high

Under-Counter Trash Can – Simplehuman Dual Compartment

If you want a modern, high-performance slide-out bin without completely rebuilding your cabinet interior, the Simplehuman Dual Compartment Under-Counter Trash Can is a premier choice. This unit specializes in delivering a commercial-grade feel for residential kitchens, making it incredibly easy to separate waste and recyclables. It is built around a heavy-duty steel frame that mounts directly to the cabinet floor, providing rock-solid stability.

The defining feature of this Simplehuman kit is its commercial-grade ball-bearing tracks, which roll smoothly and stand up to heavy daily pulling. The design includes an integrated steel handle on the front of the frame, allowing you to pull the unit out manually if you prefer not to mount it to the cabinet door. The dual buckets sit securely in the frame, and the blue recycling bucket makes sorting intuitive for family members and guests.

While this system functions beautifully, keep in mind that Simplehuman designs its bins to work best with their custom-fit liners, which can be an ongoing expense. Standard tall kitchen bags can fit, but they may slip off the rim or look less tidy. This unit is perfect for those who want an ultra-reliable, easy-to-install manual pull-out, but it is less suited for cabinets where a door-mounted, hands-free pulling setup is required.

• Key Specs:
  • Capacity: 35 liters total (divided into 20L and 15L buckets)
  • Frame Material: Commercial-grade steel with plastic buckets
  • Minimum Cabinet Opening: 10 inches wide, 20 inches deep, 20 inches high

Bottom-Mount Waste Bin – Knape & Vogt USC12-2-35PT

The Knape & Vogt USC12-2-35PT is designed to solve the annoying wobble and rattle associated with cheaper pull-out wire frames. This bottom-mount system acts as a heavy-duty workhorse, keeping two large 35-quart bins perfectly aligned and silent. By securing directly to the bottom floor of your cabinet, it lowers the center of gravity and distributes the weight of heavy trash evenly across the slides.

This product shines due to its soft-close gas spring technology, which cushions the unit during the last few inches of closure to prevent slammed doors and spilled contents. The steel frame is powder-coated for durability and features integrated door-mounting brackets that offer three-axis adjustment. This makes aligning your cabinet door simple, ensuring the exterior lines of your kitchen remodel remain perfectly flush and uniform.

Because this unit holds two generous 35-quart bins, it requires a taller and deeper cabinet space than basic models. Ensure you have at least 22.4 inches of internal depth to allow the slides to fully compress. This kit is the perfect option for active kitchens that generate a significant amount of trash and recycling, but it is not recommended for shallow or non-standard cabinets.

• Key Specs:
  • Capacity: Two 35-quart platinum plastic bins
  • Slide Type: Soft-close ball-bearing slides (80-lb load rating)
  • Minimum Cabinet Opening: 12 inches wide, 22.4 inches deep, 20.4 inches high

Single Trash Can Pull-Out – Rev-A-Shelf RV-12KD-1KC

For smaller kitchens, utility rooms, or secondary prep stations, a double-bin system is often too large. The Rev-A-Shelf RV-12KD-1KC serves as a highly efficient, space-saving single-bin pull-out that fits into exceptionally narrow cabinets. It allows you to reclaim valuable floor space while still keeping a substantial 35-quart trash bin tucked neatly behind closed doors.

The core strength of this kit is its durable chrome-plated wire frame construction, which balances lightweight design with rugged durability. It rides on heavy-duty, zinc-plated ball-bearing slides that support up to 100 pounds, ensuring that even a completely full trash can will slide out without catching or sagging. The simple four-screw bottom-mount installation means you can have this unit functional in less than twenty minutes.

Keep in mind that this is a manual pull-out kit by default, meaning you open the cabinet door first and then pull the bin forward. If you want the bin to slide out automatically when you open the cabinet door, you will need to purchase the optional door-mounting kit separately. This product is best for budget-conscious renovators and those dealing with limited cabinet footprints who do not need multi-stream waste sorting.

• Key Specs:
  • Capacity: One 35-quart white plastic bin
  • Slide Type: Heavy-duty 100-lb rated ball-bearing slides
  • Minimum Cabinet Opening: 10.75 inches wide, 22 inches deep, 19.25 inches high

Cabinet Door Mounted Bin – Hafele Salice Pivot-Out

If you are dealing with a cramped under-sink cabinet where vertical plumbing pipes and water filtration systems block standard floor-mounted slides, the Hafele Salice Pivot-Out is an ingenious solution. Rather than sliding forward on tracks, this bin mounts directly to the cabinet door and the interior sidewall. When you open the cabinet door, the trash bin pivots outward automatically, presenting itself for easy disposal.

The defining feature of this German-engineered system is its automatic lid-lifting mechanism. When the cabinet door is closed, the lid seals tightly over the bin to contain odors; as the door swings open, the lid automatically lifts and stays inside the cabinet. This hands-free operation keeps your hands clean and prevents you from having to touch a dirty bin lid while prepping food.

Because this system relies on the cabinet door hinges to support the weight of the trash, it has a smaller capacity (typically 15 liters) than floor-mounted pull-outs. It is vital to ensure your cabinet door hinges are high-quality and securely fastened to prevent sagging over time. This pivot-out bin is ideal for single or two-person households and tight under-sink spaces, but it is not built for heavy or bulky waste.

• Key Specs:
  • Capacity: 15 liters
  • Material: Stainless steel outer container with plastic inner bucket
  • Minimum Cabinet Opening: Fits standard 18-inch hinge-door cabinets (requires left or right-hand mount selection)

Top-Mount Wood Trash Pull-Out – Rev-A-Shelf 4WCTM-18

If your kitchen remodel features high-end custom cabinetry, a wire-frame or metal-chassis trash pull-out can sometimes look out of place when opened. The Rev-A-Shelf 4WCTM-18 solves this aesthetic dilemma by using a beautifully crafted maple wood frame. This top-mount system suspends the trash bins from a premium wood collar, matching the look of high-quality dovetailed drawers.

This kit utilizes over-travel ball-bearing slides, which allow the wood frame to extend completely past the edge of the countertop. This makes removing the rear bin incredibly easy, eliminating the need to awkwardly tilt a full recycling bin to clear the cabinet face frame. The solid wood construction is coated with a UV-cured clear finish that resists moisture and makes wiping down food spills simple and quick.

Because this is a top-mount system, the slides attach to the cabinet sidewalls rather than the floor. This requires highly precise cabinet interior measurements, as there is very little margin for error during installation. This kit is perfect for those who want a seamless, built-in furniture look that integrates beautifully with wood cabinetry, but it requires a more advanced installation process.

• Key Specs:
  • Capacity: Two 35-quart silver plastic bins
  • Frame Material: Solid maple wood with dovetail construction
  • Minimum Cabinet Opening: 15 inches wide, 21.75 inches deep, 21.75 inches high

Wire Frame Trash Pull-Out – Real Solutions Pearson QPAM2

The Real Solutions Pearson QPAM2 is a budget-friendly, highly practical wire-frame trash pull-out that does not compromise on functional durability. It is designed to hold two 27-quart bins, providing a simple way to introduce recycling separation into a standard kitchen without a major financial investment. The white powder-coated wire frame resists corrosion and keeps the overall weight of the unit low.

This model is built with full-extension ball-bearing glides, which ensure you can easily reach the rear recycling bin without struggle. The frame mounts to the cabinet floor using a basic four-point connection, making it one of the easiest kits on the market for DIY installation. While it lacks the whisper-quiet soft-close features of high-end models, it operates smoothly and stays securely on its tracks.

Because of the thin wire frame construction, this unit can experience some slight lateral flex when both bins are fully loaded with heavy glass bottles or wet compost. It is best to avoid overloading the bins past their weight capacity to maintain smooth operation. This kit is the perfect solution for landlords, cabin owners, or budget-conscious homeowners who need a functional dual-bin setup.

• Key Specs:
  • Capacity: Two 27-quart white plastic bins
  • Material: Heavy-gauge steel wire frame
  • Minimum Cabinet Opening: 12 inches wide, 22 inches deep, 19 inches high

Heavy-Duty Recycling Center – Hafele Cargo 60 Pull-Out

For those who take waste separation seriously and require a high-capacity, multi-stream sorting system, the Hafele Cargo 60 Pull-Out represents the pinnacle of waste management engineering. Designed to fit wider cabinets, this European-style system can house up to three large bins, allowing you to sort compost, plastics, and paper all in one central location.

The standout feature of the Cargo 60 is its integrated sheet-metal lid, which remains fixed inside the cabinet when the drawer is pulled out. This lid acts as a convenient, sturdy shelf for storing extra trash bags, cleaning supplies, or odor-neutralizing filters, while also acting as a primary odor barrier when the drawer is closed. The entire system rides on ultra-smooth, high-weight-capacity runners that feature integrated soft-close damping.

The main consideration for this Hafele system is its size and cost; it requires a wide 24-inch (600mm) cabinet footprint and represents a significant investment. However, the commercial-grade build quality and massive capacity mean it will easily outlast cheaper alternatives. This recycling center is ideal for large families, dedicated home cooks, and environmentally conscious households with ample cabinet space.

• Key Specs:
  • Capacity: Up to three bins (configurations vary, totaling up to 60 liters)
  • Mount Type: Side-wall mount with door-bracket attachment
  • Minimum Cabinet Opening: 24-inch (600mm) external cabinet width

How to Choose the Right Glides for Smooth Easy Motion

The slide mechanism is the literal backbone of any cabinet pull-out kit; it dictates how much weight the unit can carry and how easily it moves. When shopping, you will primarily choose between ball-bearing slides and roller slides. Ball-bearing slides are highly superior for trash pull-outs because they handle lateral loads well, keeping the unit from wobbling side-to-side when pulled from an angle.

+-------------------+---------------------+----------------------------+ | Slide Type        | Weight Capacity     | Ideal Use Case             | +-------------------+---------------------+----------------------------+ | Ball-Bearing      | 75 to 100+ lbs      | Standard & heavy dual bins | | Roller Slides     | 35 to 50 lbs        | Light, single-bin setups   | | Soft-Close/Damped | 80 to 100 lbs       | High-traffic family zones  | +-------------------+---------------------+----------------------------+ 

You should also look closely at the slide extension rating. Full-extension slides allow the entire frame to pull completely out of the cabinet, giving you clear vertical access to the rear bin. Over-travel slides go a step further, extending an extra inch or two past the cabinet face, which is incredibly helpful if your countertops have a deep, decorative overhang that blocks the bin openings.

Lastly, consider opting for soft-close functionality. Soft-close slides use integrated hydraulic dampers that catch the drawer during the final inches of travel, pulling it closed quietly and preventing heavy bins from crashing against the back of your cabinetry. This feature not only protects your cabinet woodwork from impact damage but also reduces noise in open-concept living spaces.

Simple Installation Steps for a Sturdy Wobble-Free Fit

Installing a pull-out trash kit is a highly manageable DIY project that can be completed with a few basic tools: a drill, a tape measure, a pencil, and a screwdriver. Begin by clearing out the cabinet completely and wiping down the interior floor. If your kit includes a paper installation template, tape it securely to the cabinet floor, making sure to align the front edge exactly as specified to clear your cabinet door hinges.

Next, pre-drill your pilot holes. Because cabinet floors are often made of thin plywood or particleboard, drilling pilot holes prevents the wood from splitting when you drive in the mounting screws. Set the slide frame over the pilot holes and secure it using the provided wood screws. Crucial tip: use a hand screwdriver for the final tightening of these screws to avoid stripping the wood threads with a high-torque power drill.

Step 1: Clear cabinet and tape down the alignment template. Step 2: Mark and pre-drill pilot holes (prevents split wood). Step 3: Secure the slide frame to the floor using a hand screwdriver. Step 4: Mount the door brackets and align the cabinet door face. 

If your kit includes a door-mounting bracket, mount it loosely to the trash frame first. Position your cabinet door against the bracket, checking for equal gaps on all sides relative to the surrounding cabinets. Once the alignment is perfect, tighten the mounting screws securely. If you experience any binding when pushing the unit in, loosen the frame screws slightly, let the slides self-align by sliding the unit in and out, and then re-tighten.

Clever Ways to Keep Your Hidden Kitchen Bins Odor-Free

Storing your trash inside a closed cabinet keeps your kitchen looking pristine, but it can also trap moisture and warm air, turning the cabinet into a breeding ground for unpleasant odors. To combat this, start by placing a charcoal odor-absorbing filter on the inside wall of the cabinet or directly on the underside of the cabinet countertop. Activated charcoal works by trapping volatile organic compounds without releasing synthetic masking scents into your cooking space.

Another practical tip is to sprinkle a thin layer of baking soda at the bottom of the plastic bins before inserting a fresh trash bag. Any small leaks or condensation will be absorbed immediately, neutralising acidic food odors before they can permeate the plastic. For compostable waste, utilize a small, dedicated bin with a silicone-sealed lid inside your main pull-out frame, emptying it daily rather than letting food scraps sit for days.

Finally, establish a monthly cleaning routine. Even with durable liners, small drips and food particles will eventually find their way to the bottom of the bins or onto the metal slide tracks. Once a month, pull the plastic buckets completely out of the cabinet and wash them down with warm, soapy water mixed with white vinegar. Let them dry completely in the sun before sliding them back into the cabinet frame to keep your kitchen smelling fresh.

Conclusion

Upgrading your kitchen with a high-quality pull-out trash can kit is one of the most satisfying and practical improvements you can make during a remodel. By selecting a system that fits your cabinet dimensions, matches your waste-sorting habits, and utilizes smooth, heavy-duty slides, you eliminate kitchen clutter and streamline your daily cleanup. Measure carefully, install with precision, and enjoy a cleaner, more efficient kitchen space for years to come.